Spider lift Teupen LEO 24GT Benefits:
True Performance Only 98 cm passing width make access through single standard doors quick and easy. With 250 kg platform capacity in the entire working area, the LEO24GT has an unrestricted outreach of 12,00 m. That is always enough capacity to take two persons including tools or material: No compromises and unrivalled in this height segment. |
|
Innovative boom technology Within the new, high-strength steel boom telescopes all cables, hoses and hydraulic cylinders are safely routed through the booms and therefore protected against damage, dirt and all weather conditions – clean and above all safe quality. |
|
Intuitive control system Blue for boom functions, yellow for stabilisers, red for the track drive: All TEUPEN controls are arranged following this easy and simple design. Furthermore, a display offers a complete overview of all important information. In standard version the LEO24GT is equipped with a cable remote control – optionally, a radio remote control is available. |
|
The TEUPEN track drive The track drive with non-marking rubber tracks provides easy, precise maneuvering and protects sensitive flooring. As a standard feature the LEO24GT is equipped with the mechanically height- and width adjustable track drive: The narrow setting decreases the width of the machine, in wide it increases ground clearance and stability. Also, levelled driving alongside slopes is possible. On request the hydraulic track drive is smoothly adjustable at a touch of a button. |
|
High-performance stabiliser system Safe positioning even with little space: The multi-position stabiliser system permits to automatically set up the machine in confined areas and on slopes. It offers three different setup positions: Both sides wide, one side wide and one side narrow or both sides narrow. In terrain or over obstacles the stabilisers overcome a height difference of 1,20 m. |
|
The platform – maximum of flexibility The platform is detachable to decrease the transport length, 180° rotatable and corner-mounted to turn into confined corners. Additionally, it is mounted from single high-strength aluminum components rather than being welded into one piece – that makes replacing damaged parts more economical. |
|
Dual power source The right power source for every job: in the standard version, the LEO24GT is equipped with a 230 V electric motor for a silent and zero-emission work inside of buildings. For outdoor use, it has a powerful and robust petrol engine. Optionally, the petrol engine can be replaced by a Kubota Diesel engine or a battery drive. |
Specification
Performance
Working height, max. | 24,00 m |
Platform height, max. | 22,00 m |
Horizontal outreach, max. (250 kg) | 12,00 m |
Up and over clearance, max. | 12,69 m |
Platform capacity, max. | 250 kg |
Jib, movable | – |
Platform, rotatable | 180 ° |
Turntable rotation, max. | 450 ° |
To be jacked up on ground slope of | 19.0 ° / 34.0 % |
Track drive, height- and width-adjustable | 19 / 46 cm |
Gradeability, max. | 16,7 ° / 30,0 % |
Slope angle, max. | 19,0 ° / 34,0 % |
Travel speed, max. | 4,0 km/h |
Measurements
Platform (height) (A) | 1,10 m |
Platform (length) (B) | 1,20 m |
Platform (width) (C) | 0,80 m |
Length (D) | 6,40 m |
Length without platform (E) | 5,05 m |
Height (F) | 1,99 m |
Width, min. (G) | 0,98 m |
Ground clearance, max. (H) | 0,44 m |
Track (length x width) (I) | 1,45 x 0,20 m |
Outrigger footprint both side wide (length) (J) | 4,70 m |
Outrigger footprint both side wide (width) (K) | 4,70 m |
Outrigger footprint one side narrow (length) (L) | 6,30 m |
Outrigger footprint one side narrow (width) (M) | 3,65 m |
Outrigger footprint both sides narrow (width) (N) | 2,65 m |
Outrigger plate Ø | 0,18 m |
Weight
Total weight | 3300 kg |
Live load in travelling position | 5,06 kN/m2 |
Live load in working position | 1,72 kN/m2 |
Point load per outrigger plate, max. | 23,70 kN |
Power Sources
Standard power sources: | |
Electric motor (230 V, 12,9 A, 2,2 kW) |
230 V, 12,9 A, 2,2 kW |
Combustion engine (petrol) |
Vanguard OHV 16HP (11,93 kW / 16,0 hp) |
Optional power source: | |
Combustion engine (Diesel) |
Kubota Z602 (10,8 kW / 14,5 hp) |
Battery drive (AGM) |
48 V |
Battery drive (Li-Ion) |
48 V |
Fuel tank capacity (petrol engine) | 11,5 l |
Fuel tank capacity (Diesel engine) | 11,5 l |
Power Supply
Electric current, max. | 230 V / 16 A |
Load Chart
Services
Tranning for Operating Aerial Work Platform
Aerial work platform is a type of vehicle designed with a working platform that can be raised and lowered easily to help you perform tasks at heights ...
View detailTRAINING ON OPERATION AND MAINTENANCE OF 3246ES SCISSOR LIFTS AND 800S BOOM LIFTS
On June 26, 2019, U-MAC Vietnam delivered two sets of 3246ES scissor lifts and 800S boom lifts to the customer according to the contract. Immediately ...
View detailMAINTENANCE SERVICE
With U-MAC’s quick maintenance service, routine maintenance has never been so convenient and fast. All you need to do is contact and schedule an...
View detail26 SAFETY PRINCIPLES WHEN USING LIFTING EQUIPMENT
U-MAC Vietnam shares with our readers 26 safety principles to pay attention to when using lifting equipment in order to avoid risks, as follows: All l...
View detail